|
NEW HALLEFFECT SENSOR FAMILIES |
Programmable Hall Switches |
|||
Device |
Parameters |
Features |
Package |
A3250 |
Bop 50-350G, Bhys 13G(typ) |
Field Programmable, Chopper-Stabilized, Unipolar Hall-Effect Switch, On-chip protection against: Supply transients, Output short-circuits and Reverse-battery condition |
UA (3-Pin SIP) |
A3251 |
Bop 50-350G, Bhys 13G(typ) |
||
Factory Programmed 2-Wire Hall Switches |
|||
Device |
Parameters |
Features |
Package |
A1140-43 |
Bop 50-115G, Brp 45-110G |
Factory programmed sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches, Low switch-pointing drift over operating temperature range, Low sensitivity to stress, On-chip Protection against: Supply transients, Reverse-battery. On-board voltage regulator, 3.5 V to 24 V operation |
LH (SOT23) |
A1145-46 |
Bop 20-60G, Brp 10-55G |
||
A1147-48 |
Bop 20-80G, Brp 10-60G |
||
Customer Programmable 2-Wire Hall Switches |
|||
Device |
Parameters |
Features |
Package |
A1180-83 |
Bop 60-200G, Bhys 15G(typ) |
Customer programmable sensitive Two-Wire Chopper-Stabilized Unipolar Hall-Effect Switches, Low switch-pointing drift over operating temperature range, Low sensitivity to stress, On-chip Protection against: Supply transients, Reverse-battery. On-board voltage regulator, 3.5 V to 24 V operation |
LH (SOT23) |
A1184 |
Bop 300-600G, Bhys 15G(typ) |
||
A1185-86 |
Bop 10-60G, Bhys 15G(typ) |
||
Customer Programmable 2-Wire Hall Switches |
|||
Device |
Parameters |
Features |
Package |
A1373/74 |
- Sens : 1,75-13mV/G
(10Bit), |
High-Precision, Output Pin-Programmable Linear Hall-Effect Sensors; Field-programmable for optimal application integration; Selectable: Sensitivity, Sensitivity TC, Output Clamp Voltage level, Output Polarity and Quiescent Output Voltage; Ratiometric Output; Wide lead-spacing with KB package |
KB (3-Pin-SIP) |
Linear Hall Sensors |
|||
Device |
Parameters |
Features |
Package |
A1301 |
Sensitivity 2,5mV/G(typ) |
Continuous-Time Ratiometric Liniear Hall Sensor; very low Noise 150µV(typ); Fast Power-on Time |
LH (SOT23) |
A1302 |
Sensitivity 1,3mV/G(typ) |
||
A1321 |
Sensitivity 5 mV/G(typ) |
Miniature Linear Hall Sensors for High-Temperature Operation; B-Field Proportional Ratiometric Output; Factory programmed; Extreme Temperature-Stable Quiescent Output Voltage |
|
A1322 |
Sensitivity 3.125 mV/G(typ) |
||
A1323 |
Sensitivity 2.5 mV/G(typ) |
||
Continuous-Time
Unipolar Hall Switches |
|||
Device |
Parameters |
Features |
Package |
A1101 |
Bop(max) 175G, Brp(min) 10G |
Continuous-Time Signal Processing - Low Noise - Low Jitter - Fast power-on time; Factory Programmed Switch Points - Tight Switch Point Distribution; Robust EMC Performance; High ESD Rating; Reverse Battery and Input Protection |
LH (SOT23) |
A1102 |
Bop(max) 245G, Brp(min) 60G |
||
A1103 |
Bop(max) 355G, Brp(min) 150G |
||
A1104 |
Bop(max) 450G, Brp(min) 25G |
||
A1106 |
Bop(max) 430G, Brp(min) 160G |
||
Continuous-Time
Bipolar Hall Switches |
|||
Device |
Parameters |
Features |
Package |
A1201 |
Bop 40..50G, Brp -50..40G |
Continuous-Time Signal Processing - Low Noise - Low Jitter - Fast power-on Time; Robust EMC Performance; High ESD Rating; Reverse Battery and Input Protection; Factory Programmed Switch Points - Tight Switch Point Distribution |
LH (SOT23) |
A1202 |
Bop 45..75G, Brp -75..45G |
||
A1203 |
Bop 65..95G, Brp 95..65G |
||
A1204 |
Bop -100..150G, Brp -100..150G |
||
Differential Hall-Effect Sensor with Integrated Filter Capacitor |
|||
Device |
Parameters |
Features |
Package |
A1421 |
Bop 0..27G, Brp -12.5..7.5G |
High Accuracy AC-coupled Speed Sensor (20Hz to 30kHz) with Integrated Filter Capacitor; Senses motion of ring magnet or ferrous targets; Wide operating temperature range; Output Frequency Range from; EMI/ESD-resistant; Large effective air gaps; 4.0 to 26.5V operating range; Reverse Battery and Supply Protection; Resistant to mechanical and thermal stress |
K (4-Pin-SIP) |
A1422 |
Bop 5..35G, Brp -35..-5G |
||
A1423 |
Bop 10..100G, Brp 100..-10 |
||
A1425 |
Bop -11..11G, Brp -11..11G |
||
Package Options |
||||
![]() |
![]() |
![]() |
![]() |
|
EH (MLPD) |
LH |
UA |
K |
KB |
Dimensions (lenght / width / height) |
||||
3,15 x 2,15 x 0,8mm |
3,10 x 2,10 x 1,13mm |
4,17 x 3,10 x 1,57mm |
5,28 x 3,51x 1,6mm |
5,28 x 3,5 x 1,6mm |